Name: EVT-TP1100 | Truss Pick
Brand: Evolve Truss
SKU: EVT-TP1100
Price: 243.00 USD
Availability: InStock

Rigging Accessory Knowledge Center

Balanced Truss Lifting.
Built Around a 1,100 lb Working Load Limit.

The EVT-TP1100 is a professional truss pick designed for stage and lighting rigging. It combines a 6061-T6 aluminum body, two half swivel clamps, and a central load-rated screw-pin shackle to create a compact lifting point for compatible triangular and square aluminum truss systems.

Product Facts

Model EVT-TP1100

SKU EVT-TP1100

Product Type Truss Pick

Maximum WLL 1,100 lb / 498.95 kg

Body Material 6061-T6 Aluminum

Weight 6.5 lb / 2.94 kg

1,100 lb Maximum WLL

15.75 in Overall Length

2 Clamps Half Swivel Clamps

0.652 in Load-Rated Shackle

6.5 lb Product Weight

Product Overview

A Compact Pick Point for Controlled Truss Lifting.

The EVT-TP1100 attaches to compatible truss chords through two half swivel clamps and transfers the lifting force to a central screw-pin shackle.

Central Load Point

The center shackle provides a defined attachment point for approved lifting hardware.

Two Half Swivel Clamps

The clamps secure the pick to compatible truss chords and allow controlled positioning.

6061-T6 Aluminum Body

The machined aluminum body provides a durable, lightweight structural connection.

1,100 lb Maximum WLL

The product source lists a maximum working load limit of 1,100 lb / 498.95 kg.

Common Applications

Designed for Professional Stage and Lighting Rigging.

Intended for trained personnel lifting or supporting compatible truss within a reviewed rigging system.

Stage Truss Lifting

Create a centered lifting point on compatible stage truss sections.

Lighting Grids

Use within approved hoist and rigging layouts for lighting truss.

Trade Show Structures

Assist with controlled lifting of compatible exhibit truss systems.

Broadcast and Film

Use for approved overhead production and studio truss systems.

Rental Inventory

Add a dedicated truss pick to professional rigging and lifting inventories.

Who It’s For

Built for Qualified Rigging Professionals.

This is load-rated rigging equipment and should only be selected, installed, and inspected by trained personnel.

Event Production Companies

For concerts, corporate events, and temporary stage structures.

Rigging Companies

For approved lifting systems using compatible aluminum truss.

Rental Companies

For professional truss and hoisting inventories.

Lighting Designers

For reviewed overhead lighting and production grids.

Broadcast and Film Crews

For studio, location, and production-stage truss systems.

Safety Managers and Engineers

For load-plan review, inspection procedures, and equipment selection.

Product Features

Built for Secure, Repeatable Rigging Setup.

Load-Rated Screw-Pin Shackle

Includes a 0.652 in / 15.87 mm central shackle for the lifting connection.

Two Half Swivel Clamps

Provides two attachment points to compatible truss chords.

Brushed Aluminum Finish

Standard finish coordinates with natural aluminum truss systems.

Custom Powder Coat Available

Available in custom gloss or matte powder-coat finishes.

Compact Profile

Measures 15.75 x 6.25 x 1.25 in for controlled placement on the truss.

Multiple Truss-Series Fit

Designed for EVT290T and EVT290S aluminum truss series.

Technical Reference

Complete Product Specifications

Product identity, dimensions, materials, load limit, clamps, shackle, finish, and compatibility.

Identification

Product Details

ModelEVT-TP1100

SKUEVT-TP1100

BrandEvolve Truss

Product TypeTruss Pick

Dimensions and Weight

Overall Size

Overall Length15.75 in / 400 mm

Overall Height6.25 in / 158.75 mm

Overall Width1.25 in / 31.75 mm

Product Weight6.5 lb / 2.94 kg

Materials and Finish

Construction

Body Material6061-T6 Aluminum Alloy

Shackle Material45# Steel

Standard FinishBrushed Aluminum

Rigging and Compatibility

System Fit

Maximum Working Load Limit1,100 lb / 498.95 kg

Shackle Size0.652 in / 15.87 mm

Clamp Configuration2 Half Swivel Clamps

Truss CompatibilityEVT290S, F34 & Standard 290 mm Systems

System Compatibility

Designed for Selected Evolve Truss Profiles. Confirm Chord Fit Before Use.

The EVT-TP1100 is listed for EVT290T triangular truss and EVT290S square aluminum truss systems.

EVT290T Triangular Truss

Compatible with the EVT290T triangular aluminum truss series.

EVT290S Square Truss

Compatible with the EVT290S square aluminum truss series.

Clamp and Chord Verification

Confirm clamp diameter, chord condition, seating, and approved attachment location before use.

Use Overview

Center the Pick. Balance the Truss Before Lifting.

Install the pick only at an approved location and verify that the truss remains balanced throughout the complete lift.

01 — Confirm the Load Plan

Verify the truss weight, attached equipment, lift points, and total rigging load.

02 — Inspect the Pick

Check the body, clamps, shackle, fasteners, threads, and contact surfaces.

03 — Position on the Truss

Place the pick at the approved location without interfering with braces or connections.

04 — Secure Both Clamps

Seat and tighten both half swivel clamps according to their approved procedure.

05 — Attach Rated Rigging

Connect only compatible, load-rated lifting hardware to the central shackle.

06 — Test and Lift Slowly

Apply a controlled test load, confirm balance, and stop immediately if movement or deformation occurs.

Inspection Procedure

Inspect Every Load-Bearing Part Before Each Use.

Aluminum Body

Check for bending, cracks, gouges, elongation, corrosion, or permanent deformation.

Swivel Clamps

Inspect the clamp bodies, hinges, fasteners, threads, and truss-contact surfaces.

Steel Shackle

Check the bow, pin, threads, seating, wear, corrosion, and distortion.

Truss Chords

Confirm the attachment area is free from dents, cracks, damaged welds, or excessive wear.

Identification and Rating

Ensure the product identity and working load limit remain known and legible.

Remove Damaged Equipment

Immediately remove the pick from service if any defect or uncertainty is found.

Safety and Rigging

Never Exceed the 1,100 lb Working Load Limit.

Final system capacity depends on the truss, clamp locations, attached equipment, hoists, slings, shackles, support points, load distribution, and complete engineered rigging plan.

Never exceed the EVT-TP1100 maximum working load limit of 1,100 lb / 498.95 kg.

Do not assume the truss, clamps, hoist, or other rigging components share the same capacity.

No load should be supported from a truss connection point unless the engineering data specifically permits it.

Inspect the pick, clamps, shackle, truss chords, and all attached rigging before every use.

Remove the product from service if any damage, deformation, worn threads, or defect is found.

Use only compatible, load-rated rigging hardware selected for the actual load case.

Selection, installation, and lifting must be performed by qualified personnel using an approved rigging plan.

Product Questions

Frequently Asked Questions

What is the maximum working load limit?

The listed maximum working load limit is 1,100 lb / 498.95 kg. The complete rigging system may have a lower allowable capacity.

What truss systems does it fit?

It is listed for EVT290T triangular truss and EVT290S square aluminum truss.

What is included with the truss pick?

The product includes two half swivel clamps and a central 0.652 in / 15.87 mm load-rated shackle.

Can the finish be customized?

Yes. Custom powder-coat colors are available in gloss or matte finishes.

Can it be installed at a truss connection?

Loads should not be supported from a truss connection point unless the truss engineering data specifically allows that load case.

Need a truss pick for your rigging system?

Contact us for compatibility checks, clamp selection, custom finishes, rigging guidance, quantity pricing, and project coordination.

Structural Solutions, Unmatched Innovation

EVT-TP1100 | Truss Pick

Balanced Truss Lifting. Built Around a 1,100 lb Working Load Limit.