EVT12S System Knowledge Center
10 Ft Square Box Truss Circle.
Four 90 Degree Sections Form a 10 Foot Outside Diameter Circle.
The EVT12S-10FT is a circular 12 x 12 inch end-plate box truss in brushed aluminum, supplied as four 90-degree sections. Bolted together, the sections make a complete 360-degree ring that fits EVT12S and other 12-inch end-plated systems. Allowable loading depends on the complete system, including supports, connections, orientation, and applied loads.
Product Facts
Product Overview
A Circular Truss Built from Four 90-Degree Sections.
Each section is a curved square truss with curved main chords and diagonal bracing, finished with end plates for bolted joints. The 10 ft size is the outside diameter, and the ring leaves an approximate 8 ft / 96 in opening. Four sets of connecting hardware ship with the circle, each with four Grade 8 bolts, four nuts, and four washers.
Application Uses
Where a 10 Ft Truss Circle Earns Its Place in Sets, Displays, and Events.
A circle gives a structure a continuous shape that straight sections cannot. Plan the footprint from the 10 ft outside diameter and the opening from the 8 ft inside diameter.
Support Options
Half Circle, Full Circle, or Flown: Three Ways to Support the Ring.
The sections are interchangeable, so the same truss supports a freestanding arch, a post-supported ring, or a flown circle. The right choice depends on the venue and the loads. Each one needs the support method reviewed for the completed structure.
Technical Reference
EVT12S-10FT Truss Circle Specifications.
Identification
Product Details
Dimensions
Circle Size
Weight
Section and Circle
Construction
Material and Tubing
Assembly Overview
Match the Plates, Then Bolt Each Joint.
Exact fit with other systems is not guaranteed. Compare plate size, thickness, and bolt-hole positions before the sections go together. Qualified personnel should assemble the circle following applicable manufacturer requirements. This outline gives neither torque values nor installation approval.
Safety and Engineering
A Truss Circle Has Its Own Load Behavior. Review the Complete System.
Straight-truss load tables do not apply to a circle. TUV certification applies to the component and does not rate a finished structure. Flown, ground-supported, freestanding, dynamic-load, and other complex setups require a project-specific static calculation and review by qualified structural or entertainment-rigging personnel, including wind and transverse forces where relevant.
Truss Circle Questions
EVT12S-10FT Frequently Asked Questions.
Can I use half of the circle?
Yes. Two 90-degree sections, SKU EVT12S-10FT-90, form a 180-degree arch weighing 88.40 lb / 40.20 kg. Support it on legs or from above, and have the support method reviewed.
Can the circle be flown or ground supported?
Both are possible with the right supports. A flown circle hangs from overhead points at the joints. A ground-supported ring stands on vertical posts and base plates. Either way, qualified personnel should review the completed structure.
Is the 10 ft size the inside or outside diameter?
It is the outside diameter, 10 ft / 120 in. Use that for the footprint. The approximate opening inside the ring is 8 ft / 96 in.
Does the circle have a load rating?
No stand-alone rating is published for the circle. Capacity depends on the supports, orientation, joints, and loads of the complete system, so have qualified personnel review it.
Ready to Build Your Circle?
Send us your space dimensions, application, and quantity, and we will quote an EVT12S 10 Ft Truss Circle with everything needed to connect it to your system.
Structural Solutions, Unmatched Innovation

