EVT12S‑10FT 10‑foot 12"×12" heavy‑duty box truss section with end‑plate bolt connection

EVT12S-10FT

Original price was: $1,170.00.Current price is: $889.00.

EVT12S-10FT — 10-Foot Truss Section – 12″ x 12″ Heavy-Duty Square Aluminum End-Plate Truss

Dimensions & Specs
Overall Length: 10.0 ft (3.04 m)
Overall Width: 12 in (304.8 mm)
Type: Heavy-Duty Square Aluminum End-Plate Truss

Construction
Material Type: Aluminum Alloy EN AW-6061 T6
Main Tubing: 1.96 in (50 mm) OD / 0.11 in (3 mm) Wall Thickness
Brace Tubing: 0.98 in (25 mm) / 0.11 in (3 mm) Wall Thickness
Connection Type: End-Plated Nut and Bolt (Heavy-Duty Bolted Truss)

Finish & Features
Surface: Aluminum Brush Finish
Certification: TUV Certified
Included: 4x Grade 8 Bolts, Nuts, and Washers
Weight: 59 lb (26.76 kg)

In stock

SKU: EVT12S-10FT Category:

EVT12S Heavy-Duty Plated Truss Knowledge Center

EVT12S-10FT 10-Foot 12 x 12 Heavy-Duty Box Truss Section.
A Straight, End-Plated Aluminum Truss Segment for Professional Structural Layouts.

The EVT12S-10FT is a 10 ft / 3.04 m straight section of heavy-duty 12 x 12 in / 304.8 x 304.8 mm square aluminum box truss. It uses an end-plated nut-and-bolt connection and is built from EN AW-6061 T6 aluminum alloy with 50 mm main tubing and 25 mm brace tubing. The section ships with four Grade 8 bolts, nuts, and washers. Its allowable load depends on the complete truss system, span, support locations, connection condition, load arrangement, and applicable EVT12S load tables—not on this single segment alone.

Product Facts

Model / SKUEVT12S-10FT
Product ClassHeavy-Duty Square Box Truss
Overall Length10.0 ft / 3.04 m
Profile12 x 12 in / 304.8 x 304.8 mm
ConnectionEnd-Plated Nut and Bolt
Weight59 lb / 26.76 kg
10.0 ftOverall Length
12 x 12 inSquare Profile
59 lbProduct Weight
50 mmMain Tube Outside Diameter
Grade 8Included Bolt Hardware

Product Overview

A 10-Foot Straight Segment for 12-Inch End-Plated Box Truss Systems.

The EVT12S-10FT is a straight, 10-foot square box truss section intended for compatible 12-inch plated truss systems. Its 10-foot length can reduce the number of joints in long linear runs, overhead grids, and other reviewed structural layouts. The rigid 12 x 12 in profile uses plated ends and a nut-and-bolt connection rather than conical connectors.

10-Foot Straight Section
A 10.0 ft / 3.04 m straight segment for constructing longer compatible truss runs and grids.
12 x 12 in Box Profile
Square, heavy-duty aluminum truss profile measuring 12 x 12 in / 304.8 x 304.8 mm.
End-Plated Connection
Uses an industry-standard style nut-and-bolt end-plate connection instead of a conical coupler connection.
System Component
This is a structural truss section. Its capacity and permitted use depend on the complete configured system.

Layout Context

Use in Reviewed Long Runs, Grids, and Professional Staging Structures.

The 10-foot section supports modular construction of compatible 12-inch plated truss structures. Use it only within a documented configuration that accounts for span, supports, connection condition, loads, and any required engineering review. The longer straight length can help reduce joint count, but it does not by itself authorize a particular span or loading arrangement.

Long Linear Runs
Use as a longer straight segment in compatible truss runs where a 10-foot module matches the reviewed layout.
Overhead Grids
Use within a complete overhead grid that has been designed, supported, and reviewed for the actual loading condition.
Stage and Event Structures
Use in professional staging, production, exhibit, lighting, and structural layouts with the required planning and approvals.
Architectural Layouts
Use in reviewed architectural or scenic truss arrangements where the 12-inch plated profile and 10-foot module are appropriate.

Technical Reference

EVT12S-10FT Product Specifications.

Identification

Product Details

Model / SKUEVT12S-10FT
BrandEvolve Truss
Product TypeHeavy-Duty Square Aluminum End-Plate Truss
Connection TypeEnd-Plated Nut and Bolt

Dimensions and Weight

Physical Reference

Overall Length10.0 ft / 3.04 m
Overall Width12 in / 304.8 mm
Overall Height12 in / 304.8 mm
Weight59 lb / 26.76 kg

Construction

Material and Tubing

MaterialEN AW-6061 T6 Aluminum Alloy
Main Tubing50 mm / 1.96 in OD, 3 mm / 0.11 in Wall
Brace Tubing25 mm / 0.98 in OD, 3 mm / 0.11 in Wall
FinishBrushed Aluminum

Included Hardware

Connection Hardware

Included4 Grade 8 Bolts, Nuts, and Washers
Hardware FunctionEnd-Plate Connection Assembly
Torque RequirementFollow Manufacturer Specifications
Certification StatedTUV Manufacturing Standards

End-Plate Connection

Align the Plates. Install and Torque the Complete Bolt Set.

The EVT12S-10FT uses a plated nut-and-bolt connection. The supplied hardware is four Grade 8 bolts, nuts, and washers. Before applying load, verify precise end-plate alignment, inspect bolt holes and plates, install the full bolt set, and torque the bolts in accordance with manufacturer specifications. Do not rely on a partial connection or mismatched plate geometry.

Inspect the End Plates
Inspect end plates, bolt holes, chord alignment, and hardware for damage, deformation, wear, or corrosion before use.
Align Before Bolting
Bring compatible plates into precise alignment. Do not force an incompatible, damaged, or misaligned connection.
Use the Full Hardware Set
Install all four required Grade 8 bolts, nuts, and washers for the completed end-plate connection.
Torque to Specification
Torque connection hardware to the applicable manufacturer specification and inspect the completed joint before lifting or loading.

System Compatibility

Compatible 12-Inch Plated Systems. Verify the Actual End-Plate Interface.

The EVT12S-10FT is designed for EVT12S and compatible industry-standard 12-inch plated box truss bolt patterns, including systems identified on the product source as Tomcat, James Thomas Engineering, Milos, and Show Solutions. Compatibility is not automatic: confirm end-plate dimensions, bolt-hole pattern, plate thickness, chord alignment, bolt hardware, and the complete structural plan before combining products from different manufacturers.

EVT12S System
Designed as a 10-foot straight component for compatible EVT12S heavy-duty plated truss structures.
Industry-Standard Patterns
The product source identifies compatibility context with standard 12-inch plated truss bolt patterns, including named major systems.
Verify Bolt Patterns
Compare plate dimensions, hole locations, plate thickness, and the required bolt assembly before purchase or installation.
Mixed-System Review
Do not mix manufacturers unless the actual interface and complete structural configuration have been strictly verified and approved as required.

Installation Checks

Inspect the Truss. Then Verify Every Bolted Joint and the Complete Structure.

A plated truss system is only as complete as its installed joints, support arrangement, and approved structural plan. Perform assembly only with personnel familiar with trussing and rigging, and inspect the final configuration before lifting or applying load.

01 — Confirm the Layout
Confirm that the 10-foot module, profile, spans, supports, loads, and connection plan match the reviewed design.
02 — Inspect Components
Do not use truss sections, end plates, bolt holes, or hardware that are cracked, bent, deformed, excessively worn, or otherwise compromised.
03 — Verify Interface Fit
For any mixed system, verify end-plate dimensions, bolt patterns, plate alignment, and chord geometry before assembly.
04 — Assemble Full Bolt Sets
Use the complete required Grade 8 bolt, nut, and washer assembly at every applicable end-plate connection.
05 — Torque and Inspect
Torque bolts to manufacturer specifications and inspect every completed joint before lifting or applying load.
06 — Review the System
Verify the completed structure, supports, loading arrangement, and required approvals before operation.

Safety and Engineering

A Truss Section Is Not a Stand-Alone Load Rating. Use the Complete-System Load Data.

The allowable load of an EVT12S-10FT installation depends on the full configuration, including span length, truss orientation, support arrangement, connection condition, distributed and point loads, and the applicable EVT12S load tables. Do not infer a permitted load from the section length, tubing size, or individual product weight. Consult a qualified engineer and the official system data for the specific structure where required.

Use applicable EVT12S load tables for the actual span and configuration; do not assign a load rating to this isolated 10-foot section.
Do not exceed the capacity of any truss component, connection, support, hoist, hardware item, or the complete structure.
Inspect end plates, bolt holes, hardware, and chords before each use; remove damaged or compromised components from service.
Use all required Grade 8 bolts, nuts, and washers, and torque them to manufacturer specifications.
Do not mix plated truss systems unless bolt patterns, plate dimensions, alignment, and the complete structural configuration have been verified.
Do not force plate alignment or use bolts to pull incompatible, damaged, or misaligned truss sections together.
Perform assembly and lifting only with qualified personnel and in accordance with applicable rules, plans, and site procedures.
Have the complete structure reviewed by a qualified authority or licensed professional engineer where required.

Product Questions

Frequently Asked Questions.

What is the EVT12S-10FT?

It is a 10-foot straight, 12 x 12 inch heavy-duty square aluminum box truss section with an end-plated nut-and-bolt connection.

What hardware is included?

The product source states that the section ships with four Grade 8 bolts, nuts, and washers for end-plate assembly.

What is it compatible with?

It is designed for EVT12S and compatible standard 12-inch plated box truss bolt patterns, with compatibility context including Tomcat, James Thomas Engineering, Milos, and Show Solutions. Verify the actual plate interface before combining systems.

What is the section weight?

The listed product weight is 59 lb / 26.76 kg.

How much can one 10-foot section hold?

Do not use the individual section as a stand-alone load rating. Allowable loading depends on the complete configuration, span, supports, connections, orientation, and applicable EVT12S load tables.

Can I connect it to another plated truss brand?

Only after verifying the actual end-plate dimensions, bolt-hole pattern, plate thickness, chord alignment, hardware, and complete structural configuration. Do not assume compatibility based on the nominal 12-inch profile alone.

Planning a 12-inch plated truss run, grid, or structural layout?

Contact us for product identification, compatible section planning, connection-hardware guidance, technical documents, layout review, load-table coordination, and engineering support.

Contact UsRequest a Quote

Structural Solutions, Unmatched Innovation