EVT12S Truss Spacer
2 Inch Aluminum Truss Spacer.
Adds a 2 Inch Increment to 12-Inch End-Plated Truss Systems.
The EVT12S-2IN is a 2 inch aluminum end plate spacer for EVT12S and 12-Inch End-Plated Truss Systems. Two end plates joined by four tubular standoffs add a 2 inch / 50.8 mm increment between compatible end plates. The spacer adds length and a bolted connection to a completed truss system. It does not increase truss capacity.
Product Facts
Product Overview
A 2 Inch End Plate Spacer for 12-Inch End-Plated Truss Systems.
The EVT12S-2IN is a 2 inch aluminum spacer made of two 10 mm end plates joined by four 2 inch tubular standoffs, with no diagonal braces. It adds a 2 inch / 50.8 mm increment between compatible end plates, has a 6 inch center opening, and uses a four-bolt end-plated connection.
Truss Spacer Uses
2 Inch Truss Spacer for Lighting Grids, LED Wall Frames, and Display Structures.
The EVT12S-2IN may be used in compatible plated truss systems for lighting grids, LED wall frames, trade-show structures, touring systems, and rental inventory. Confirm the complete truss system, support conditions, connection count, hardware, and intended use before placing any structure into service.
Included Hardware
Supplied with Hardware for One Four-Point Connection.
Four Grade 8 bolts, four nuts, and four washers are included with the spacer. Confirm the quantity, bolt length, hardware specification, engagement, and tightening requirements for the complete truss system before use. Additional hardware may be required where the system includes multiple connections.
Technical Reference
EVT12S-2IN End Plate Spacer Specifications.
Identification
Product Details
Dimensions
Overall Dimensions
Construction
Material and Standoffs
Connection Context
System Interface
System Compatibility
EVT12S and 12-Inch End-Plated Truss Systems. Verify Every Connection Before Assembly.
The EVT12S-2IN is designed for EVT12S and 12-Inch End-Plated Truss Systems. Before joining components from different systems, verify end-plate dimensions, bolt-hole locations, plate alignment, required hardware, fastener engagement, and full seating of the assembled connection.
Assembly Overview
Align the End Plates. Install and Check All Four Fasteners.
The spacer installs between compatible plated truss components using the applicable four-bolt end-plate connection method. Assembly should be completed by personnel qualified for the truss system and according to applicable manufacturer requirements. This overview does not provide torque values or replace approved installation instructions.
Safety and Engineering
A Truss Spacer Adds Length. It Does Not Increase Truss Capacity.
The EVT12S-2IN adds 2 inches and a bolted connection to the truss system. The allowable loading and suitability of the completed system depend on the truss model, span, support conditions, connection count, orientation, applied loads, suspension method, and project-specific review. Load-bearing, suspended, dynamic-load, or other complex configurations require review by qualified structural or entertainment-rigging personnel.
Truss Spacer Questions
EVT12S-2IN Frequently Asked Questions.
What are 2 inch truss spacers used for?
They add an exact, fixed amount of length to a truss run. Typical jobs include sizing an LED video wall support frame to its panel array, and closing a short gap so a lighting grid or stage rig lands on a venue pick point or footprint when standard sections do not fit the space.
Does a 2 inch truss spacer increase the load capacity of my truss?
No. It adds length and one more bolted connection. The loading the completed system can carry depends on the truss model, span, supports, number of connections and how it is loaded, so follow the load ratings of your main truss sections and have qualified personnel review suspended or load-bearing setups. Do not hang loads directly from the spacer.
How is the 2 inch spacer built?
It has two 10 mm aluminum end plates joined by four 2 in / 50.8 mm tubular standoffs, with no diagonal braces. Each end plate has four 18 mm bolt holes and a 6 in / 152.4 mm center opening.
What hardware comes with the 2 inch spacer?
Four Grade 8 bolts, four nuts, and four washers are included for one four-point end-plate connection. Additional hardware may be needed for other connections in the system.
Need a 2 Inch EVT12S Truss Spacer?
Contact us for spacer selection, compatibility information, product information, and quantity-quote support. For load-bearing or suspended truss systems, coordinate the completed system with qualified engineering or rigging personnel.
Structural Solutions, Unmatched Innovation

