EVT12S System Knowledge Center
6 Ft Square Box Truss Circle.
Two 180 Degree Arcs Form a 72 Inch Outside Diameter Circle.
The EVT12S-6FT is a circular 12 x 12 inch end-plate box truss in brushed aluminum, supplied as two 180-degree arcs. Bolted together, the arcs make a complete 360-degree ring that fits EVT12S and other 12-inch end-plated systems. Allowable loading depends on the complete system, including supports, connections, orientation, and applied loads.
Product Facts
Product Overview
A Circular Truss Built from Two 180-Degree Arcs.
Each arc is a curved square truss with curved main chords and diagonal bracing, finished with end plates for bolted joints. With a 12 inch profile, the ring leaves an approximate 4 ft / 48.03 in opening in the middle. Two sets of connecting hardware ship with the circle, each with four Grade 8 bolts, four nuts, and four washers.
Application Uses
Where a 6 Ft Truss Circle Earns Its Place in Sets, Displays, and Events.
A circle gives a structure a continuous shape that straight sections cannot. Each use below still needs a review of supports, orientation, attachment points, and applied loads.
Technical Reference
EVT12S-6FT Truss Circle Specifications.
Identification
Product Details
Dimensions
Circle Size
Weight
Arc and Circle
Construction
Material and Tubing
System Compatibility
Built for 12-Inch End-Plated Systems. Check the Interface First.
Exact fit with other systems is not guaranteed. Before combining components, compare end-plate dimensions and thickness, bolt-hole positions, and chord alignment.
Assembly Overview
Align, Bolt, and Inspect Both Joints.
Qualified personnel should assemble the circle following applicable manufacturer requirements. This outline gives neither torque values nor installation approval.
Safety and Engineering
A Truss Circle Has Its Own Load Behavior. Review the Complete System.
Straight-truss load tables do not apply to a circle, and no stand-alone capacity value is published for it. TUV certification applies to the component and does not rate a finished structure. Vertical, suspended, freestanding, dynamic-load, and other complex setups require a project-specific static calculation and review by qualified structural or entertainment-rigging personnel, including wind and transverse forces where relevant.
Truss Circle Questions
EVT12S-6FT Frequently Asked Questions.
Can I use just one arc?
Yes. A single 180-degree arc forms a half ring for arches and partial frames. It weighs 48.44 lb / 21.97 kg, and its SKU is EVT12S-6FT-180.
Is the 6 ft size the inside or outside diameter?
It is the outside diameter, 6 ft / 72.05 in. The approximate inside opening is 4 ft / 48.03 in.
Does the circle have a load rating?
No stand-alone rating is published. Capacity depends on the supports, orientation, joints, and loads of the complete system, so have qualified personnel review it.
Can it be hung or stood upright?
Only after a project-specific static calculation and engineer review that includes wind and transverse forces.
Ready to Build Your Circle?
Send us your space dimensions, application, and quantity, and we will quote an EVT12S 6 Ft Truss Circle with everything needed to connect it to your system.
Structural Solutions, Unmatched Innovation



