EVT290A‑CS60 Black male truss spacer, 60 mm (2.36 in) length for 50 mm (2 in) tubing
Male-to-male conical coupler spacer installed between truss segments in a 290 mm system
EVT290A‑CS60 Black male truss spacer, 60 mm (2.36 in) length for 50 mm (2 in) tubing
Male-to-male conical coupler spacer installed between truss segments in a 290 mm system

EVT290A-CS60 Black

Original price was: $50.00.Current price is: $35.00.

EVT290A-CS60 Black — Coupler Spacer 60mm / 2.36 in (Matte Black)

Dimensions & Specs
Spacer Length: 2.36 in (60 mm)
Tube Diameter: 1.96 in (50 mm) OD
Function: Allows expansion and adjustment to custom measurements
Type: Coupler Spacer

Construction
Material Type: Aluminum Alloy EN AW-6061 T6
Compatibility: Compatible with standard 290mm Truss systems

Finish & Features
Surface: Matte Black Powder Finish
Weight: 0.99 lb (0.45 kg)

In stock

SKU: EVT290A-CS60-Black Categories: , , ,

EVT290S Black Truss System Knowledge Center

EVT290A-CS60 Black 60 mm / 2.36 in Truss Spacer.
A Matte Black Male-to-Male Conical Spacer for Modular 290 mm Truss Builds.

The EVT290A-CS60 Black is a double-ended male conical aluminum spacer that adds a fixed 60 mm / 2.36 in at one compatible 290 mm square truss connection. It is designed for 50 mm / 1.96 in tubing and has a matte black powder-coat finish for black-finish truss layouts where a silver spacer would be visually distracting. The spacer changes connection geometry at one joint; it is not a truss section, independent support point, or direct load-attachment location. Confirm full coupler engagement, pins, retention hardware, and the complete engineered structure before lifting or applying load.

Product Facts

Model / SKUEVT290A-CS60-Black
Product ClassMale Truss Coupler Spacer
Added Length60 mm / 2.36 in
Tube Interface50 mm / 1.96 in Tubing
FinishMatte Black Powder Coat
Weight0.99 lb / 0.45 kg
60 mmAdded Connection Length
2.36 inAdded Connection Length
50 mmTube Outside Diameter
Matte BlackPowder-Coat Finish
290 mmConical Truss System

Product Overview

A Fixed 60 mm Spacer for One Compatible 290 mm Conical Truss Connection.

The EVT290A-CS60 Black is a single-piece male-to-male conical spacer with an integrated 60 mm collar. It inserts into compatible conical receivers between adjoining 290 mm square truss sections and creates a fixed 60 mm / 2.36 in correction at that joint. The matte black powder-coat finish helps maintain visual continuity in black-truss, theater, club, house-of-worship, studio, scenic, and exhibit installations.

Fixed 60 mm Collar
Adds a fixed 60 mm / 2.36 in dimension at one selected connection. It does not provide adjustable travel or telescoping length.
Male-to-Male Conical Form
Provides male conical ends for insertion into the receivers of adjoining compatible truss sections.
50 mm Tube Interface
Designed for 50 mm / 1.96 in tubing within compatible 290 mm conical-connector truss systems.
Connection-Level Component
The spacer changes one joint. It is not a truss section, separate support point, or direct load-attachment location.

What It Changes

It Adds 60 mm at One Joint. It Does Not Establish a New Structural Rating.

When installed in a compatible conical connection, the spacer increases the effective length at the selected joint by 60 mm / 2.36 in. It does not independently establish allowable span, load capacity, pick-point location, support arrangement, or approval for the modified structure. Evaluate the complete system after the connection geometry has changed.

Changes
Adds a fixed 60 mm / 2.36 in to the effective length of one selected truss connection.
Does Not Change
Does not independently establish a load rating, allowable span, pick-point location, or support plan.
Supply Scope
Confirm the current order and packing documentation for delivered connection hardware and accessory requirements.
Does Not Permit
Does not permit direct attachment or support of loads from the spacer connection point.

Selection Guidance

Select the Black CS60 When The Layout Requires a 60 mm Correction and a Black Finish.

Use the EVT290A-CS60 Black when the documented layout requires a fixed 60 mm / 2.36 in correction at one compatible 290 mm conical truss joint and a matte black finish is preferred. Do not use it as an adjustable fitting, a generic extension, a repair for damaged truss, or a substitute for a different measured correction.

Measured 60 mm Difference
Use when the approved layout identifies a fixed 60 mm correction at one specific compatible connection.
Black Truss Systems
Use where a matte black connection accessory helps maintain the visual appearance of a black truss layout.
Custom Layout Alignment
Use in a reviewed scenic, exhibit, architectural, lighting, or technical layout where 60 mm is the required correction.
Not an Adjustable Coupler
Do not use to force alignment, create an unmeasured correction, or replace a required engineered connection solution.

Technical Reference

EVT290A-CS60 Black Product Specifications.

Identification

Product Details

Model / SKUEVT290A-CS60-Black
BrandEvolve Truss
Product TypeMale Truss Coupler Spacer
Connection FormDouble-Ended Male Conical

Spacer Geometry

Dimensions and Weight

Added Connection Length60 mm / 2.36 in
Tube Interface50 mm / 1.96 in Outside Diameter
Documented Dimensions50 x 140 x 50 mm
Weight0.99 lb / 0.45 kg

Construction

Material and Finish

MaterialEN AW-6061 T6 Aluminum Alloy
FinishMatte Black Powder Coat
Functional Output60 mm Connection-Length Expansion

Compatibility

System Context

Truss System Context290 mm Conical-Connector Truss Systems
Tubing Context50 mm / 1.96 in Tubing
Compatibility ClaimStandard 290 mm Truss Systems

System Compatibility

Compatible 290 mm Conical Systems. Verify the Actual Connection Before Use.

The EVT290A-CS60 Black is designed for 50 mm / 1.96 in tubing within compatible 290 mm conical-connector truss systems. Verify the actual receiver spacing, conical coupler dimensions, chord geometry, pin length, retaining hardware, and complete structural plan before combining separately sourced components or lifting the completed structure.

290 mm Conical Systems
Use only with compatible 290 mm conical-connector truss systems that match the required physical connection interface.
50 mm Tube Context
The product is identified for 50 mm / 1.96 in tubing. Confirm the actual chord and receiver interface before assembly.
Full Coupler Engagement
Verify that the selected conical coupler is long enough to fully engage both truss receivers after the 60 mm spacer is installed.
Mixed-System Verification
Test-fit mixed-brand or separately sourced components on the ground before lifting and verify the completed connection and structure.

Installation Checks

Confirm the 60 mm Requirement. Then Verify the Entire Connection.

The spacer changes the effective length and connection depth at one joint. Install it only after confirming the required 60 mm correction, inspecting the components, test-fitting the connection, and verifying coupler engagement, pins, retention hardware, and the complete structural plan.

01 — Confirm the Correction
Confirm that the approved layout requires a fixed 60 mm / 2.36 in correction at the selected connection.
02 — Inspect Components
Do not use damaged, deformed, cracked, worn, or otherwise compromised spacers, truss receivers, couplers, pins, or retaining hardware.
03 — Test-Fit Before Lifting
Confirm that the spacer, receivers, coupler arrangement, pins, and retaining hardware fit together with required engagement.
04 — Verify Coupler Engagement
Confirm that the selected conical coupler fully engages both truss receivers after the 60 mm spacer is added.
05 — Install Retaining Hardware
Install the pins and retaining hardware required by the actual connection and complete structural plan.
06 — Inspect the Complete Structure
Verify the completed connection and surrounding structure against the approved plan before any load is applied or the structure is lifted.

Safety and Engineering

The Spacer Changes Connection Geometry. It Does Not Override System Limits.

The EVT290A-CS60 Black is a structural connection component. It does not independently establish a load rating for the modified structure. Do not exceed the capacity of the spacer or the truss system it modifies. Do not support loads directly from the spacer connection point. Review the complete structure—including the modified joint—for the actual installation.

Do not exceed the capacity of the spacer or the truss system it modifies.
Do not attach or support loads directly from the connection where the spacer is installed.
Do not use the spacer to force a misaligned connection or compensate for damaged truss components.
Verify full conical coupler engagement in both receivers after the spacer is installed.
Use pins and retention hardware of sufficient length and suitability for the completed connection geometry.
Do not use fewer connectors, pins, or retainers than the approved connection configuration requires.
Test-fit mixed-brand connections on the ground before lifting.
Have the complete structure reviewed by a qualified authority or licensed professional engineer where required.

Evidence and Review

What This Page Confirms, and What the Installed Connection Must Still Establish.

This page confirms the supplied product facts: a fixed 60 mm correction, 50 mm / 1.96 in tube interface, 50 x 140 x 50 mm documented dimensions, EN AW-6061 T6 aluminum, matte black powder-coat finish, 0.99 lb / 0.45 kg weight, and the stated 290 mm conical-system context. It does not establish a safe span, capacity, pick point, support plan, mixed-brand installation, or complete structural outcome.

Confirmed Product Facts
60 mm / 2.36 in fixed correction, 50 mm / 1.96 in tube interface, 50 x 140 x 50 mm documented dimensions, EN AW-6061 T6 aluminum, matte black finish, and 0.99 lb / 0.45 kg weight.
Installation-Specific Facts
Actual receiver fit, coupler configuration, engagement depth, pin length, retention method, structural capacity, load arrangement, and required approvals must be determined for the project.
Evidence Worth Retaining
Keep the current technical drawing, component specification, ground test-fit record, hardware selection, inspection record, and qualified reviewer approval with the project file.
No Invented Capacity Claims
Do not describe the spacer as suitable for a particular load, brand mix, suspended layout, or installation type unless supported by attributable technical records and required review.

Product Questions

Frequently Asked Questions.

What does the EVT290A-CS60 Black do?

It adds a fixed 60 mm / 2.36 in at one compatible 290 mm conical truss connection while providing a matte black finish.

What tubing is it designed for?

The product source identifies a 50 mm / 1.96 in tube interface within compatible 290 mm conical-connector truss systems.

Why choose the black version?

The matte black powder-coat finish helps maintain visual continuity in black-truss, theater, studio, club, house-of-worship, scenic, exhibit, and other finish-sensitive environments.

Can it be used as a load point?

No. Do not attach or support loads directly from the spacer connection point. The complete structure must be evaluated for the actual installation.

Can I combine this spacer with other spacers?

Do not stack or combine spacers unless the exact configuration has been approved for the complete structure. A combined arrangement changes connection geometry and requires review.

Why does coupler engagement matter?

The 60 mm collar changes the connection geometry. Verify that the selected coupler fully engages both truss receivers and that the required pins and retention hardware remain suitable before lifting or applying load.

Need to close a 60 mm gap in a black 290 mm truss layout?

Contact us for product identification, compatibility guidance, connection-hardware planning, layout review, spacer quantities, technical drawings, and engineering coordination.

Contact UsRequest a Quote

Structural Solutions, Unmatched Innovation