EVT290S-300 Black 9.84-Foot / 3.0-Meter Square Truss Straight Section

EVT290S-300 Black | 9.84ft (3.0m)

Original price was: $1,137.00.Current price is: $758.00.

EVT290S-300 Black — 3.0 Meter (9.84 ft) Medium-Duty Square Aluminum Conical Truss (Matte Black)

Dimensions
Overall Truss Length: 9.84 ft (3.0 m) Straight Segment
Overall Truss Width: 11.41 in (290 mm)

Construction
Material Type: Aluminum Alloy EN AW-6082 T6
Main Tubing: 1.96 in (50 mm) Outer Diameter with 0.078 in (2 mm) Wall Thickness
Brace Tubing: 0.78 in (20 mm) Diagonal Bracing with 0.078 in (2 mm) Wall Thickness

Finish & Features
Surface: Matte Black Powder Coat Finish
Certification: TUV certified
Connection Type: Conical Connection System (Includes Couplers, Tapered Pins, and R-Clips)
Compatibility: Fits F34, EVT290S, and all standard 290mm Square Truss systems
Weight: 40 lb (18.14 kg)

In stock

SKU: EVT290S-300-Black Category:

EVT290S Truss Systems Knowledge Center

3.0 m Matte Black Square Truss Straight Section.
For Trade Show Booths, Trade Show Exhibits, and Trade Show Displays.

The EVT290S-300 Black is a matte-black 3.0 m / 9.84 ft straight section for compatible EVT290S, F34, and matching 290 mm square truss systems. Use this longer standard-length member where a trade show booth, trade show exhibit, trade show display, convention display, branded activation, product-demo area, or other compatible planned truss layout calls for a 3.0 m straight run.

Identity and Core Facts

Model / SKUEVT290S-300 Black
Section Length9.84 ft / 3.0 m
Truss Profile11.41 in / 290 mm Square
ConnectionConical Coupler System
MaterialEN AW-6082 T6 Aluminum
FinishMatte Black Powder Coat
9.84 ftStraight Length
290 mmSquare Profile
50 x 2 mmMain Chords
20 x 2 mmDiagonal Braces
ConicalConnection System

Straight Section Overview

3.0 m F34 Square Truss for Trade Show Booths and Display Systems.

The EVT290S-300 Black is a 3.0 m / 9.84 ft straight member for compatible 290 mm square truss systems. It supports controlled spacing in planned trade show booths, trade show exhibits, trade show displays, convention displays, branded activation structures, product-demo environments, retail pop-ups, and other compatible modular builds.

9.84 ft Straight Section
Use this section where the exhibit drawing calls for a 3.0 m member between compatible truss connection points.
Long-Run Spacing Control
The 3.0 m length supports planned spacing and alignment in longer compatible booth widths, display frames, overhead branding structures, and exhibition frameworks.
Matte Black Finish
The matte-black powder coat supports installations where the truss should remain visually subdued around graphics, lighting, video, LED content, hanging signs, and branded exhibit elements.

Trade Show Displays

Modular Frameworks for Trade Show Displays and Brand Environments.

Use the EVT290S-300 Black as one component within a compatible, project-specific trade show display system. Its 9.84 ft length can support planned spacing in branded display frames, overhead identity structures, product-demo areas, convention displays, lighting grids, video frameworks, and compatible modular exhibit environments.

Branded Display Frames
Build compatible frames for planned graphics, display panels, lighting, video, product presentation, and brand-activation infrastructure.
Overhead Booth Identity
Use within planned structures for approved overhead branding elements, hanging-sign frames, lighting, and directional display components.
Video and LED Displays
Add a 3.0 m run to compatible display frameworks for approved video, LED, projection, lighting, backdrop, and presentation elements.
Product Demonstrations
Create planned structures around product demos, sampling areas, interactive displays, technical showcases, and customer-engagement spaces.
Trade Show Use Clarification
Trade show booth, trade show exhibit, trade show display, convention, activation, retail, and event references describe potential end-use environments for a completed compatible truss system. This individual section is not exhibit-rated, hanging-sign-rated, display-rated, booth-rated, equipment-rated, or approved for any particular trade show, convention center, public-facing installation, or modular display system.

Trade Show Booths & Exhibits

Support Planned Frameworks for Exhibits, Activations, and Product Launches.

The EVT290S-300 Black can be incorporated into compatible, project-specific structures for trade show booths, custom exhibits, convention-center displays, sponsor activations, retail pop-ups, product launches, experiential marketing environments, and corporate event programs.

Custom Trade Show Booths
Build compatible display and presentation frameworks for trade show booths, branded environments, product areas, and customer-engagement spaces.
Trade Show Exhibits
Use within planned exhibit structures for graphics, product displays, video, lighting, interactive elements, and sponsor-presentation areas.
Convention Displays
Create compatible frameworks around convention displays, corporate presentations, product launches, technical demos, and marketing showcases.
Retail and Brand Activations
Build planned lighting grids, video frames, branded environments, and product-reveal structures for retail pop-ups and experiential campaigns.

Applications

A 3.0 m Member for Exhibit and Display Structures.

Use the EVT290S-300 Black wherever a compatible 290 mm square-truss build calls for a 3.0 m / 9.84 ft section. The completed structure determines required supports, rigging method, loads, accessories, anchorage, venue requirements, and project approvals.

Convention Center Booths
Build compatible truss frameworks for trade show displays, signage, lighting, video, graphics, product zones, and technical-presentation infrastructure.
Corporate Exhibits
Use within planned product-development displays, corporate showcase environments, technical briefing spaces, and customer-engagement events.
Hanging-Sign Frameworks
Add a 3.0 m member to a compatible overhead branding or display structure where the complete configuration has been reviewed.
Pop-Ups and Activations
Create planned modular frames for experiential marketing, retail displays, sponsor activations, video systems, and branded customer-experience areas.

Series Construction

290 mm Square Truss with Conical Coupler Connections.

The EVT290S-300 Black carries the core construction of the EVT290S series in a 3.0 m straight section: a 290 x 290 mm square profile, 50 mm main chords, 20 mm diagonal braces, EN AW-6082 T6 aluminum, matte-black powder coat, and conical end connections.

290 mm Square Profile
The 290 x 290 mm profile is designed for compatible square-truss components with matching receiver spacing and connection interfaces.
50 mm Main Chords
Main chords measure 50 mm outside diameter with 2 mm wall thickness and provide the primary connection and accessory-attachment tubing.
20 mm Diagonal Braces
Diagonal braces measure 20 mm outside diameter with 2 mm wall thickness.
Conical Connection System
Conical couplers, coupler pins, and r-clips create the mechanical interface between compatible truss sections.

Included Connection Hardware

What Ships with the EVT290S-300 Black.

Each straight section ships with the connection hardware used to join it to compatible conical-receiver components. Confirm the project component schedule before assembly; a finished trade show booth, trade show exhibit, or display system may also require longer sections, corners, base plates, clamps, rigging hardware, ballast, and other project-specific items.

4 Conical Couplers
Couplers create the mechanical connection between the section and compatible receiver ends.
8 Coupler Pins
Pins secure the couplers after the mating components have been aligned and fully seated.
8 R-Clips
R-clips retain each fully seated coupler pin and must be installed before the structure is moved or loaded.

Technical Reference

Product Specifications.

Identification

Product Details

Model / SKUEVT290S-300 Black
BrandEvolve Truss
Product TypeMatte Black Square Aluminum Straight Truss Section
CertificationTUV Certified

Dimensions

Section Size

Length9.84 ft / 3.0 m
Width11.41 in / 290 mm
Height11.41 in / 290 mm
WeightVerify current product documentation

Construction

Tube and Material Data

Main Chords1.96 in / 50 mm OD x .08 in / 2 mm Wall
Diagonal Braces.79 in / 20 mm OD x .08 in / 2 mm Wall
MaterialAluminum Alloy EN AW-6082 T6
FinishMatte Black Powder Coat

Connection Set

Included Hardware

Connection TypeConical Coupler System
Couplers4 Included
Coupler Pins8 Included
R-Clips8 Included

System Compatibility

Match the Truss Profile and Connection Before You Build.

The EVT290S-300 Black is intended for compatible EVT290S, F34, and matching 290 mm square truss systems using conical connections. Similar appearance alone does not establish compatibility. Confirm receiver spacing, coupler fit, chord spacing, alignment, and applicable system documentation before assembly.

Receiver Spacing
All four receiver positions should align without pulling, spreading, or forcing the truss faces together.
Coupler Seating
Use couplers that match the receiver interface of both connected components and verify even seating before installing pins.
1.96 in / 50 mm Clamp Fit
The 1.96 in / 50 mm OD main chords accept compatible clamps for approved lighting, signage, graphics, display, video, and accessory attachment.
Mixed Components
When components come from different sources, confirm physical fit and applicable engineering information before using them together.

Connection and Inspection

Confirm Fit First. Then Seat, Pin, and Retain.

Once receiver spacing and compatible hardware are confirmed, assemble the connection in this order. Prepare the current booth or exhibit drawing, compatible mating components, supplied connection hardware, and approved support or rigging plan. Assemble on a stable work surface with access to inspect every receiver and pin location.

01 — Inspect Components
Inspect the section, receiver ends, couplers, pins, and r-clips. Do not use bent, cracked, worn, or damaged components.
02 — Insert Couplers
Place the four conical couplers into the receiver positions and confirm that they sit correctly.
03 — Align the Truss Faces
Bring the mating component into position evenly. The truss faces should close without excessive force.
04 — Pin and Retain
After alignment is confirmed, install every coupler pin fully and fit an r-clip to every pin before moving, lifting, rigging, or loading the structure.
If a Connection Does Not Close
Stop assembly. Check receiver spacing, coupler fit, damage, debris, and alignment. Do not force the truss, modify components, or drive a pin against resistance. Resolve the cause before the structure is moved or loaded.

Engineering Reference

Load-Span Reference for Completed Truss Runs.

All truss loading calculations are based on a completed compatible 290 mm square-truss run supported or suspended at both ends: static loading only; loads applied at approved truss panel points; truss self-weight included in listed capacities; spans may consist of different truss lengths; and bending-moment and shear interaction at truss connections is considered. Values are limited by strength and reduced per ANSI E1.21.

Allowable loading reference, limited by strength and reduced per ANSI E1.21.
Load CaseUnit2.0 m2.5 m3.0 m3.5 m4.0 m4.5 m5.0 m5.5 m6.0 m6.5 m7.0 m7.5 m8.0 m8.5 m9.0 m9.5 m10.0 m10.5 m11.0 m11.5 m12.0 m
Spanft6.568.209.8411.4813.1214.7616.4118.0519.6921.3322.9724.6126.2527.8929.5331.1732.8134.4536.0937.7339.37
Center Point Load (CPL)lb1,3601,2651,1701,075980905830755680640595555510484460435410390375360340
Deflectionin0.090.140.200.250.300.390.470.560.650.770.891.011.131.301.471.641.812.042.272.502.73
Third Point Loads (TPL)lb810765725680640595555510470450435415400370340310280265245230215
Deflectionin0.080.140.210.270.340.440.540.640.740.911.091.271.451.611.771.932.082.282.472.672.86
Quarter Point Loads (QPL)lb510505500490485455420390355330305280255240230215205195185170160
Deflectionin0.070.140.210.280.350.470.580.700.810.941.071.191.321.521.731.942.142.362.582.793.01
Uniformly Distributed Load (UDL)lb/ft230202174147119107948270615345373330272422201917
Deflectionin0.060.120.180.240.300.430.560.690.820.941.061.181.301.501.711.912.112.352.592.833.07
Load cases: CPL — one center load · TPL — two equal third-point loads · QPL — two equal quarter-point loads · UDL — load distributed over the complete span
Load-Span Assumptions and Project Review

Table assumptions: The reference evaluates unbraced truss configured as a simply supported beam. The primary analyzed spans were 2 m, 4 m, 6 m, 8 m, 10 m, and 12 m; intervening published values are interpolated. If CPL, TPL, or QPL loading occurs at a truss connection, a minimum of two chords is assumed to support the vertical load.

Not included: Shock loads, dynamic loads, and resultant horizontal rigging forces, including forces from bridles or baskets. UDL applies only when the load is evenly distributed across the entire span. Published load cases are alternatives and are not additive.

Licensed structural-engineer review is required for every truss system. These values are general planning reference only and do not approve or rate an individual straight section, a completed trade show booth, a hanging-sign framework, a trade show display, a convention exhibit, a ground-support structure, a suspended configuration, or any other assembled truss system. Confirm the complete configuration, supports, connections, span, applied loads, attachment points, rigging, anchorage, environmental conditions, and applicable code requirements with a licensed structural engineer before use.

Current documentation: Product specifications, included hardware, compatibility information, and availability are subject to change. Verify current product drawings, manufacturer instructions, connection hardware, and applicable engineering information before ordering, assembling, or using this product.

System Responsibility

Capacity Comes from the Completed Configuration.

This 9.84 ft / 3.0 m section does not establish an independent span or load rating for a finished structure. Determine capacity from the complete arrangement, including connected components, span, orientation, supports, attachment locations, rigging method, applied loads, graphics, signage, lighting, video, LED, display panels, product equipment, and venue requirements.

Do not load an unverified connection point or treat one section as proof of capacity for the larger structure.
Attach loads only at approved truss panel points. Do not assume that an arbitrary position along a chord is an approved loading location.
Published load cases are not additive. Evaluate the actual span, support condition, load location, and load type using applicable engineering information for the completed truss run.
Do not use bridles unless they have been approved in writing by a licensed structural engineer. Dynamic or shock loads require separate consideration.
Inspect every coupler, pin, r-clip, clamp, sling, shackle, safety cable, and attachment point before use. Replace damaged, worn, or improperly fitting parts.
For trade show booths, convention exhibits, hanging signage, suspended display systems, public-facing structures, or other regulated installations, confirm venue, facility, rigging, ballast or anchorage, and required engineering review before use.

Frequently Asked Questions

EVT290S-300 Black Questions.

Why choose a 9.84 ft / 3.0 m straight truss section?

Choose this section when a compatible 290 mm square-truss design calls for a 3.0 m member. It provides controlled spacing for trade show booths, trade show exhibits, trade show displays, branded environments, lighting grids, overhead identity structures, and compatible modular display systems.

Can this section be used for trade show booths and displays?

It may be used as one component of a compatible completed system for approved trade show booths, exhibits, convention displays, and brand activations. Those end-use references do not mean the individual section is certified or rated for a specialized exhibit, hanging-sign system, public-facing display, or suspended installation.

What does the load-span reference apply to?

It applies only to a completed compatible 290 mm square-truss run configured as a simply supported beam under the published assumptions. It does not independently rate this section, a trade show booth, hanging-sign frame, trade show display, convention exhibit, or mixed-component assembly. A licensed structural engineer must review every truss system before use.

What conical connection hardware is included?

Each EVT290S-300 Black section includes 4 conical couplers, 8 coupler pins, and 8 r-clips for compatible conical connections.

Planning a trade show booth, exhibit, or display system?

Contact us for matching straight sections, corners, base plates, compatible 1.96 in / 50 mm clamps, current technical documents, quantity pricing, and project coordination.

Contact UsRequest a Quote

Structural Solutions, Unmatched Innovation