EVT290X-029 Square Truss Straight Section - 11.4 Inches / 0.29 Meter, Durable Aluminum Truss, TUV-Certified

EVT290X-029 | 0.95ft (0.29m)

Original price was: $365.00.Current price is: $251.00.

EVT290X-029 — 0.29 Meter (0.95 ft) Heavy-Duty Square Aluminum Conical Truss Spacer

Dimensions
Overall Truss Length: 0.95 ft (0.29 m) Straight Segment
Overall Truss Width: 11.41 in (290 mm)

Construction
Material Type: Aluminum Alloy EN AW-6082 T6
Main Tubing: 1.96 in (50 mm) Outer Diameter with 0.11 in (3 mm) Wall Thickness
Brace Tubing: 0.98 in (25 mm) Diagonal Bracing with 0.11 in (3 mm) Wall Thickness

Finish & Features
Surface: Aluminum Brush Finish
Certification: TUV certified
Connection Type: Conical Connection System (Includes Couplers, Tapered Pins, and R-Clips)
Compatibility: Fits F34, EVT290S, and all standard 290mm Square Truss systems
Weight: 4.08 lb (1.85 kg)

In stock

SKU: EVT290X-029 Category:

EVT290S Truss Systems Knowledge Center

0.95 Ft Square Aluminum Truss Spacer.
A Straight 11.42 Inch Section Sized to Match a Corner Block.

The EVT290X-029 is a 0.29 m square aluminum truss spacer. Its 290 x 290 mm outside profile matches a compatible corner block, so it takes the place of a corner block where the run continues straight, without adding an unused side receiver. It is built from EN AW-6082 T6 aluminum with 50 mm main chords and 25 mm diagonal braces, and it includes conical connection hardware. Allowable span, capacity, and loading depend on the completed truss system.

Product Facts

Model / SKUEVT290X-029
Product ClassSquare Aluminum Truss Spacer
Length0.95 ft / 11.42 in / 290 mm
Truss Size0.95 x 0.95 ft / 11.42 x 11.42 in / 290 x 290 mm
Weight4.08 lb / 1.85 kg
CertificationTUV Certified
0.95 ftOverall Length
0.95 ftSquare Truss Size
50 x 3 mmMain Chords
25 x 3 mmDiagonal Braces
4.08 lbProduct Weight

Product Overview

A Corner-Block-Size Spacer for Straight Truss Runs.

The EVT290X-029 adds a 0.95 ft / 11.42 in straight section to a compatible 290 mm square-truss run. Because its length and outside width are both 290 mm, it matches the footprint of a compatible corner block. Use it where a corner block is not needed and the run continues straight, helping maintain the square profile without adding an unnecessary side receiver. It is a truss component within the finished system—not a stand-alone solution for span, capacity, rigging, stability, or support design.

Corner-Block-Size Footprint
Matches the 290 x 290 mm outside profile of a compatible corner block.
For Straight Runs
Provides a straight spacer section where a corner connection is not required.
Consistent Square Profile
Helps preserve the intended external profile of a truss run or frame.
Included Connection Hardware
Includes conical connection hardware for the spacer’s compatible truss interfaces.

Applications

Designed for Straight Truss Segments.

Use the EVT290X-029 where a 290 mm square-truss run needs to keep a corner-block-size outside profile but no corner connection is required. Typical applications include trade-show structures, lighting grids, stage structures, square frames, booth systems, presentation structures, and custom assemblies with many corner blocks. Final configuration, orientation, supports, attachments, loads, and rigging must be reviewed for the actual structure.

Square Frames
Maintains a consistent 290 mm square profile where a corner connection is not required.
Trade-Show Structures
Useful for booth systems and display frames that repeat the same square truss profile.
Lighting Grids
Provides a short straight section within a compatible lighting grid.
Stage and Scenic Frames
Supports approved design refinements in compatible truss frames and scenic structures.

Functional Details

Matching-Length Form in 290 mm Square Truss.

The spacer combines a 290 mm straight segment with a 290 x 290 mm square profile, 50 mm main chords, 25 mm diagonal bracing, EN AW-6082 T6 aluminum alloy, and brushed-aluminum finish. It is intended to provide a straight section with an outside footprint comparable to a compatible corner block when the final assembly does not need a side connection. The included hardware supports the spacer’s conical interfaces; it does not independently establish the load rating or suitability of the completed assembly.

290 mm Straight Spacer
Provides a 0.95 ft / 11.42 in adjustment that matches the outside truss width.
EN AW-6082 T6 Aluminum
Uses the aluminum alloy specified for this spacer component.
50 mm Clamp Context
The 50 mm main chords may accept compatible clamps where their placement and loading are approved for the completed structure.
Brushed Aluminum Finish
Maintains a natural metallic appearance alongside compatible brushed-aluminum truss sections.

Technical Details

EVT290X-029 Factual Product Reference.

Identification

Product Information

Model / SKUEVT290X-029
BrandEvolve Truss
Product TypeSquare Aluminum Truss Spacer
CertificationTUV Certified

Overall Dimensions

Spacer Size

Length0.95 ft / 11.42 in / 290 mm
Width0.95 ft / 11.42 in / 290 mm
Height0.95 ft / 11.42 in / 290 mm
Weight4.08 lb / 1.85 kg

Tube Construction

Chord and Brace Sizes

Main Chords50 mm OD x 3 mm Wall
Diagonal Braces25 mm OD x 3 mm Wall
MaterialAluminum Alloy EN AW-6082 T6
FinishBrushed Aluminum

Connection Hardware

Included Components

Couplers4 Included
Coupler Pins8 Included
R-Clips8 Included
Connection SystemConical Connection System

System Compatibility

EVT290S, F34, and Compatible 290 mm Square Truss Systems.

The EVT290X-029 uses a 290 mm square truss profile, 50 mm main chords, and a conical connection system. It is intended for compatible EVT290S, F34, and standard 290 mm square-truss systems with matching receiver spacing and conical interface dimensions. Compatibility must be verified at the actual connection, including receiver fit, coupler dimensions, full conical seating, and engineering data for the completed configuration.

EVT290S Compatibility
Integrates with compatible EVT290S straight sections and related 290 mm square-truss components.
F34 Compatibility
Compatible with matching F34 290 mm square truss and conical receiver interfaces when the actual connection fits correctly.
Standard 290 mm Square Systems
May fit compatible standard 290 mm square systems with matching conical receivers. Verify the physical interface before combining separately sourced or mixed-brand components.
Clamp Context
Compatible 50 mm clamps may be used on the main chords where their placement and loading are approved for the completed structure.

Assembly Overview

Installing the Spacer in a Compatible 290 mm Square Truss Run.

This spacer is one component of a completed truss assembly. Before use, verify the finished run length, matching truss size, component condition, full conical seating, hardware engagement, support conditions, and the approved loading for the complete system.

01 — Confirm the Spacer Fits
Verify that a 290 mm straight spacer—not a corner block—fits the intended position in the run.
02 — Inspect All Components
Check the spacer, receivers, included couplers, included coupler pins, and included r-clips for damage or deformation.
03 — Match the Truss Size
Confirm the mating truss is a 290 mm square profile with matching receiver spacing.
04 — Seat the Couplers
Bring the sections together evenly without forcing or misaligning the conical connections.
05 — Install Pins and R-Clips
Fully secure every connection with the included coupler pins and included r-clips before applying load.
06 — Complete the Final Inspection
Verify alignment, hardware engagement, overall run dimensions, support conditions, and the approved loading before use.

Safety and Loading

The Spacer Size Does Not Establish Allowable System Loading.

The 290 mm spacer is a dimensional component within a larger truss assembly. Its corner-block-size footprint does not independently establish the allowable span, capacity, rigging condition, support arrangement, wind suitability, or load rating of the completed structure. Allowable loading depends on the complete truss system, total span, support conditions, orientation, applied loads, connection details, and the applicable manufacturer data or required project-specific engineering review.

Use the applicable manufacturer load tables and engineering data for the complete assembled structure.
Do not support loads directly from truss connection points unless the complete configuration is designed and approved for the actual load arrangement.
Inspect the spacer, welds, main chords, diagonal braces, couplers, coupler pins, and r-clips before every use.
Do not use bent, cracked, heavily worn, or otherwise damaged components.
Account for dynamic, transverse, seismic, and environmental forces, including wind loads, in the complete structural design.
Assembly should be completed by trained truss personnel and reviewed by a licensed professional engineer where required.

Evidence and Review

What This Page Confirms, and What the Installed Structure Must Still Establish.

This page confirms the documented product facts: 0.95 ft / 11.42 in / 290 mm length, 0.95 x 0.95 ft / 11.42 x 11.42 in / 290 x 290 mm square profile, 50 mm OD x 3 mm main chords, 25 mm OD x 3 mm diagonal bracing, EN AW-6082 T6 aluminum construction, brushed-aluminum finish, 4.08 lb / 1.85 kg weight, TUV certification, and included connection hardware. It does not establish allowable span, capacity, suspension method, support design, rigging configuration, wind suitability, attachment load, or stability for a specific completed structure.

Confirmed Product Facts
290 mm straight spacer, 290 mm square profile, 50 mm main chords, 25 mm diagonal braces, EN AW-6082 T6 aluminum, brushed finish, TUV certification, and included conical connection hardware.
Included Hardware
Four included couplers, eight included coupler pins, and eight included R-Clips support the spacer’s conical interfaces.
Installation-Specific Facts
System span, orientation, support condition, suspension, attachment loads, clamp placement, rigging hardware, wind exposure, and public-access controls must be determined for the specific installation.
Evidence Worth Retaining
Keep the current product drawing, manufacturer load data, final assembly drawing, component and hardware schedule, inspection record, photos, and required approvals with the project file.
Documentation and Project Review
Product information on this page is based on current product documentation and is subject to change. Verify the current product drawing, included hardware, compatibility, and installation instructions before ordering or assembling. For suspended, public-facing, outdoor, or load-bearing structures, obtain the project-specific review required by the applicable authority and design professional.

Frequently Asked Questions

EVT290X-029 Questions.

What is the EVT290X-029 used for?

It adds a straight 0.95 ft / 11.42 in section to a 290 mm square-truss run. Because its outside profile matches a compatible corner block, it fits where the run continues straight and a corner connection is not needed.

Can it take the place of a corner block?

Yes, where the run continues straight. The spacer has the same 290 mm length and outside width as a compatible corner block, so it fills that position without an unused side receiver. It does not turn a corner, and you should confirm the dimensions of your own corner block before swapping.

Does it fit EVT290S and F34 truss, and what comes with it?

It is intended for compatible EVT290S, F34, and standard 290 mm square-truss systems when receiver spacing and coupler dimensions match. Each spacer includes four couplers, eight coupler pins, and eight R-clips for its conical connections.

How much load can the spacer hold?

No stand-alone load rating is provided for the spacer. Allowable loading depends on the complete truss system, including span, supports, orientation, connections, and applied loads, so use the manufacturer load data for the full structure and get engineering review where required.

Need an EVT290X-029 Truss Spacer?

Contact us for compatibility checks, included-hardware confirmation, technical documents, manufacturer load-data coordination, engineering coordination, and quantity pricing.

Contact UsRequest a Quote

Structural Solutions, Unmatched Innovation