9.84 FT Square Aluminum Truss: Dimensions, Applications & F34 Compatibility
An informative guide to 3-meter square aluminum truss for stage production, lighting grids, trade show displays, and modular event structures.
Why Truss Section Length Matters
Choosing the right aluminum truss involves more than selecting the appropriate profile or connection system. Section length plays an important role in how a structure is designed, transported, and assembled.
For stage production, trade shows, and entertainment installations, standard-length truss sections allow designers to combine modular components into structures with specific dimensions.
The EVT290S-300, available through Truss Genius, is a 9.84-foot (3-meter) straight aluminum truss section featuring an 11.41-inch (290 mm) square profile. Manufactured from EN AW-6082-T6 aluminum alloy, it uses a conical connection system designed for compatible F34-style and EVT290S truss components.
Its 3-meter length makes it a practical choice for longer straight runs in lighting grids, exhibition structures, branded environments, and approved event-production frameworks.
Understanding its dimensions, construction, and connection compatibility helps buyers determine whether this section is appropriate for a new installation or an existing truss inventory.
Understanding the Difference Between 9.84 FT and 10 FT Truss
One detail that frequently causes confusion when purchasing aluminum truss is the difference between metric and imperial measurements.
Many manufacturers produce aluminum truss in metric lengths, while customers in the United States commonly search using feet and inches.
A standard 3-meter truss section measures approximately 9.84 feet, or 118.11 inches.
An actual 10-foot section measures 120 inches, making the standard 3-meter version approximately 1.89 inches shorter.
Although customers may encounter 3-meter truss when searching for 10-foot aluminum truss, these dimensions are not interchangeable.
This distinction becomes important when planning structures with specific dimensional requirements, particularly when coordinating fixed mounting points, architectural clearances, or existing structural components.
Before ordering, confirm whether the project requires an actual 10-foot section or a standard 3-meter length.
Understanding the 11.41-Inch Square Truss Profile
The EVT290S-300 features a nominal square profile measuring 11.41 inches wide by 11.41 inches high (290 x 290 mm).
Its construction consists of four main aluminum chords connected through welded diagonal bracing.
The main chords measure approximately 1.97 inches (50 mm) in outside diameter with a 0.079-inch (2 mm) wall thickness. The diagonal braces measure approximately 0.79 inches (20 mm) in outside diameter, also with a 2 mm wall thickness.
Manufactured from EN AW-6082-T6 aluminum alloy, the truss features a brushed aluminum finish commonly used in professional staging and event-production equipment.
Its four-chord configuration accommodates compatible, appropriately rated clamps and accessories, allowing the section to be incorporated into various approved modular structures.
The profile is commonly associated with F34-style square truss systems, although connection compatibility must be verified between manufacturers.
Common Applications for Square Aluminum Truss
The 3-meter format is used across numerous industries where modular structural frameworks are required.
Stage Lighting and Concert Production
Stage and concert productions frequently incorporate aluminum square truss into overhead lighting grids, horizontal runs, and technical-production frameworks.
A 9.84-foot section can provide a straight member between connection points within an approved truss assembly.
Compatible 50 mm clamps may be used for approved lighting fixtures and production accessories, with attachment locations determined by the completed structural design.
Trade Show Exhibits and Display Structures
Trade show exhibitors often use aluminum truss for branded frameworks, overhead displays, product presentations, and exhibition structures.
A 3-meter section can be incorporated into compatible horizontal or vertical arrangements where a longer straight member is required.
Its modular construction also allows components to be disassembled, transported, and reused across different events.
Brand Activations and Corporate Events
Product launches, sponsorship displays, and experiential marketing installations frequently incorporate aluminum truss to create temporary branded environments.
Square truss can provide a framework for approved graphics, lighting, video elements, and decorative attachments.
A 9.84-foot section may be incorporated wherever the completed layout specifies a standard 3-meter member.
LED Video and Scenic Frameworks
LED video installations and scenic productions often require structural frameworks with carefully planned dimensions.
Compatible aluminum truss may be incorporated into approved support arrangements for video equipment, scenic elements, and technical-production accessories.
These applications require evaluation of the completed structure, including equipment positioning, support conditions, and applied loads.
EVT290S-300 Technical Specifications
The EVT290S-300 is a medium-duty square aluminum conical truss straight section with the following published specifications.
Model / SKU: EVT290S-300
Product Type: Square Aluminum Conical Truss – Straight Section
Overall Length: 9.84 ft (3.0 m / 118.11 in)
Overall Width: 11.41 in (290 mm)
Overall Height: 11.41 in (290 mm)
Truss Profile: 11.41 x 11.41 in Square
Material: EN AW-6082-T6 Aluminum Alloy
Main Chords: 1.97 in (50 mm) OD x 0.079 in (2 mm) Wall
Diagonal Bracing: 0.79 in (20 mm) OD x 0.079 in (2 mm) Wall
Finish: Brushed Aluminum
Published Weight: Approximately 40 lb (18.14 kg)
Connection Type: Conical Coupler System
Included Hardware: 4 Conical Couplers, 8 Tapered Pins, and 8 R-Clips
Compatibility: Matching EVT290S, F34-Style, and Standard 290 mm Square Truss Systems
Clamp Compatibility: Appropriately Rated 1.97 in / 50 mm Clamps
Certification: TÜV Certified
Published specifications, weight, and applicable certification documentation should be confirmed against current product information before ordering.
How Conical Truss Connections Work
One advantage of modular square aluminum truss is the ability to connect compatible sections without permanent welding or modification during normal assembly.
The EVT290S-300 uses conical couplers, tapered pins, and retaining R-clips.
During installation, couplers are positioned within the matching receivers of adjoining truss components. Once the sections are correctly aligned and fully seated, tapered pins secure the connections, and R-clips retain each pin.
Each EVT290S-300 straight section includes four conical couplers, eight tapered pins, and eight R-clips.
Before assembly, inspect all connection hardware and receiver ends for wear, deformation, or damage.
If the components do not align correctly, installation should stop until the cause is identified. Connections should never be forced together or modified to compensate for improper fit.
F34 Truss Compatibility: What Buyers Should Know
When expanding an existing aluminum truss inventory, compatibility is one of the most important purchasing considerations.
Many manufacturers offer 290 mm square truss with similar external dimensions and conical connection systems.
However, matching outside dimensions do not automatically mean the components are interchangeable.
Variations in receiver spacing, coupler geometry, manufacturing tolerances, and hardware specifications may affect proper assembly.
The EVT290S-300 is intended for compatible EVT290S, F34-style, and other matching 290 mm square truss systems.
Before combining components from different manufacturers, verify receiver alignment, coupler fit, tapered pin engagement, and applicable engineering documentation.
This is particularly important for production companies and rental businesses purchasing additional sections to expand an existing inventory.
Understanding Square Truss Load Capacity
One of the most important considerations when selecting aluminum truss is understanding how structural loading is determined.
A 9.84-foot truss section does not have one universal allowable load for every installation.
Capacity depends on the completed structure, including overall span, supports, connections, orientation, attachment locations, and applied loads.
Published load-span information for compatible 290 mm square truss systems may include center-point loads, third-point loads, quarter-point loads, and uniformly distributed loads.
Each represents a different loading condition, and these values cannot simply be added together.
The supplied EVT290S engineering reference evaluates completed compatible truss runs under specified static-loading assumptions, with strength-based values reduced according to ANSI E1.21.
These figures do not independently approve a particular stage, lighting grid, suspended installation, or other completed structure.
A licensed structural engineer must review the actual configuration and determine the allowable loading and support requirements.
Choosing Between Longer and Shorter Truss Sections
When planning a modular structure, designers may choose between using one longer section or connecting several shorter compatible sections.
A single 9.84-foot member reduces the number of intermediate connection points required to achieve that nominal length.
This can simplify inventory planning, assembly, and connection inspections.
Shorter sections may offer greater flexibility when transportation space is limited or when the structure requires additional dimensional combinations.
For production and rental companies, maintaining several standard truss lengths can help accommodate different installations without relying on custom-fabricated components.
The appropriate selection depends on the project dimensions, transportation requirements, available components, and structural design.
What to Consider Before Purchasing
Before ordering the EVT290S-300 or another square aluminum truss section, confirm the required dimensions and connection specifications.
Start by verifying that the design calls for a standard 3-meter length rather than an exact 10-foot member.
Next, confirm the truss profile and connection interface. The EVT290S-300 uses an 11.41-inch square profile with conical connections.
Compatibility with existing straight sections, corner blocks, base plates, and connection hardware should also be reviewed.
For installations supporting lighting, video, scenery, or suspended equipment, the completed-system engineering information must be evaluated.
Transportation and storage should also be considered. A single 9.84-foot section requires adequate vehicle length, handling space, and installation access.
Reviewing these requirements before purchasing can prevent dimensional errors and connection issues during installation.
Frequently Asked Questions About 9.84 FT Square Aluminum Truss
1. Is 9.84 ft square truss the same as 10-foot aluminum truss?
No. A standard 3-meter truss measures approximately 9.84 feet (118.11 inches), making it about 1.89 inches shorter than an actual 10-foot section.
2. What are the dimensions and weight of the EVT290S-300?
The EVT290S-300 measures 9.84 feet long with an 11.41 x 11.41-inch square profile. Its published weight is approximately 40 pounds (18.14 kilograms), subject to current product documentation.
3. Can EVT290S truss connect to other F34 square truss brands?
The EVT290S series is intended for compatible F34-style and 290 mm square truss systems. Receiver dimensions, coupler compatibility, hardware engagement, and applicable engineering information must be verified before combining components.
4. How much weight can a 9.84 ft square aluminum truss support?
Allowable loading depends on the complete truss assembly, including span, supports, connections, and applied loads. Published load-span data must be evaluated under its stated assumptions, with qualified engineering review of the completed structure.
Final Thoughts
The 9.84 ft square aluminum truss section is a practical option for modular structures requiring longer straight members.
Its 11.41-inch square profile, four-chord construction, and conical connection format make it relevant to stage production, lighting grids, exhibitions, and temporary event installations.
The EVT290S-300 provides a standard 3-meter section manufactured from EN AW-6082-T6 aluminum alloy, with connection hardware for compatible modular assemblies.
Whether you're planning a new structure or expanding an existing inventory, selecting the correct length and confirming connection compatibility are essential steps.
Accurate measurements and a properly planned system remain the foundation of a successful truss installation.
Explore 9.84 FT Square Aluminum Truss at Truss Genius
Looking for a 9.84 ft square aluminum truss section for your next stage, lighting, trade show, or event installation?
Truss Genius offers the EVT290S-300 3-meter square aluminum conical truss, along with compatible straight sections, corner blocks, base plates, clamps, and connection hardware.
Learn more about the EVT290S-300 9.84 FT Square Aluminum Truss:
For compatibility questions, technical specifications, CAD drawings, engineering coordination, or quantity quotations, contact our team.
Website: https://trussgenius.com
Email: info@trussgenius.com
Contact: https://trussgenius.com/contact-us/
Truss Genius Worldwide
Structural Solutions, Unmatched Innovation!