10x10 Trade Show Exhibit Display Booth | EVT290S-Adelanto
10x10 Trade Show Exhibit Display Booth | EVT290S-Adelanto - Image 2
10x10 Trade Show Exhibit Display Booth | EVT290S-Adelanto
10x10 Trade Show Exhibit Display Booth | EVT290S-Adelanto - Image 2

10x10 Trade Show Exhibit Display Booth | EVT290S-Adelanto

Original price was: $10,538.00.Current price is: $7,025.00.

10x10 Trade Show Truss Booth — Circular Front Design – Square Truss Display System

Dimensions & Specs
Footprint: 9.97 ft x 9.97 ft (3.04 m x 3.04 m)
Overall Height: 9.97 ft (3.04 m)
Truss Size: 11.42 in (290 mm) F34 Square Aluminum Truss
Coverage: ~100 sq ft
Type: Complete In-Line "Circular Front" Booth System
Configurations: Build 2 Different Booth Configurations

Construction
Material Type: Aluminum Alloy EN AW-6082 T6
Main Tubing: 1.97 in (50 mm) OD / 0.08 in (2 mm) Wall Thickness
Brace Tubing: 0.79 in (20 mm) Diagonal Bracing / 0.08 in (2 mm) Wall Thickness
Connection Type: Conical Connection System (Includes Couplers, Tapered Pins, and R-Clips)
Included Hardware: 76 Couplers, 152 Coupler Pins, and 152 R-Clips
Assembly: Lightweight truss assembles in minutes with a steel hammer

Finish & Features
Surface: Aluminum Brush Finish
Compatibility: Fits all standard 290 mm / F34 Truss Systems
Weight: Approx. 425 lb (192.78 kg)

In stock

SKU: EVT290S-TSB-10x10-Adelanto Category:

EVT290S Circular Front Booth System Knowledge Center

10x10 Truss Trade Show Booth with Circular Front.
Modular Aluminum Truss That Builds Into 2 Configurations.

The EVT290S-Adelanto is a modular 10x10 trade show booth built from lightweight EVT290S 290 mm square aluminum truss, with a circular front that gives your exhibit a curved, open entry. One component set assembles into 2 different booth configurations, so you can refresh your look from show to show. The booth weighs about 425 lb, includes 19 sets of connecting hardware, and assembles in minutes with a steel hammer.

System Facts

ModelEVT290S-Adelanto
SKUEVT290S-TSB-10x10-ADELANTO
Booth Footprint9.97 x 9.97 ft
Overall Height9.97 ft
Front DesignCircular Front
System WeightApprox. 425 lb / 192.78 kg
10x10 ftBooth Class
CircularFront Design
2Configurations
290 mmSquare Truss
19 SetsConnecting Hardware

System Overview

A Professional 10x10 Truss Booth with a Circular Front for Trade Shows and Branded Environments.

The EVT290S-Adelanto combines a 9.97 x 9.97 ft footprint, a 9.97 ft overall height, a circular front, and modular conical construction in one reusable booth system. Fresh booth design shows existing and potential customers that your brand is moving forward, and the Adelanto gives you two ways to do that from one set of components.

Circular Front
A curved front gives the booth an open, welcoming entry and a distinctive look on the show floor.
2 Booth Configurations
One component set can be assembled into 2 different configurations, so your booth can change from show to show.
Lightweight EVT290S Construction
Uses EVT290S 290 mm square aluminum truss with 50 mm main chords and conical connections, for a booth weight of about 425 lb.
Reusable Booth System
The booth can be transported, disassembled, and rebuilt for future events.

Common Applications

Designed for Trade Shows and Branded Environments.

01
Trade Show Exhibits
Create a branded overhead structure with a curved front for 10x10 exhibit spaces.
02
Product Displays
Frame product demonstrations, shelving, graphics, and display counters.
03
Branded Activations
Support banners, signage, lighting, and branded visual elements.
04
Temporary Retail
Build pop-up and promotional environments with reusable truss components.
05
Corporate Events
Create registration, sponsor, demonstration, or hospitality structures.

Who It’s For

Built for Teams That Need A Reusable 10x10 Display System.

Exhibit Builders
For modular client booths and repeat trade-show installations.
Marketing Agencies
For branded activations, launches, and promotional environments.
Event Production Companies
For corporate displays, sponsor areas, and temporary event structures.
Rental Companies
For repeat-use 10x10 booth inventory that can be deployed across multiple events.
Retail Brands
For pop-up shops, product showcases, and temporary branded spaces.
In-House Exhibit Teams
For companies attending multiple events with reusable components.

Configuration

One Component Set. Two Ways to Build the Adelanto.

The EVT290S-Adelanto kit assembles into 2 different booth configurations, each with the circular front. Select the configuration that fits your space, traffic flow, and brand presentation before you begin assembly.

2 Configurations
The included components can be assembled into 2 different booth configurations.
One Configuration per Installation
Choose one configuration for each installation. The kit is one booth and does not build both configurations at the same time.
Repeatable Assembly
The booth can be disassembled, transported, and rebuilt in either configuration.
Optional Expansion
Larger footprints or different designs require additional EVT290S or F34 components and a new engineering review.

Included Components

Complete Circular Front Booth System with 19 Sets of Connecting Hardware.

The system includes the EVT290S truss components required for the 10x10 circular front booth, along with 19 sets of connecting hardware, and each set includes 4 couplers, 8 coupler pins, and 8 R-Clips. In total, that is 76 couplers, 152 coupler pins, and 152 R-Clips.

EVT290S Truss Sections
290 mm square aluminum truss components, including the curved front sections, for the booth structure.
Corner and Base Components
Corner and base pieces required to complete the freestanding booth.
19 Sets of Hardware
Nineteen sets of connecting hardware for the conical connections.
Each Set: 4 Couplers, 8 Pins, 8 R-Clips
Each set includes 4 couplers, 8 coupler pins, and 8 R-Clips.

Technical Reference

Complete System Specifications

Identification

System Details

ModelEVT290S-Adelanto
SKUEVT290S-TSB-10x10-ADELANTO
BrandEvolve Truss
System Type10x10 Square Aluminum Truss Booth with Circular Front
Configurations2 from One System

Dimensions and Weight

Overall Size

Overall Width9.97 ft
Overall Length9.97 ft
Overall Height9.97 ft
System WeightApprox. 425 lb / 192.78 kg

Truss Construction

EVT290S System

Truss SizeEVT290S 11.42 in / 290 mm Square
Main Chords1.97 in / 50 mm OD, 0.08 in / 2 mm Wall
Diagonal Bracing0.79 in / 20 mm
MaterialEN AW-6082 T6 Aluminum
FinishBrushed Aluminum

Assembly and Compatibility

System Requirements

Connection TypeConical Couplers, Tapered Pins, and R-Clips
Included Hardware76 Couplers, 152 Coupler Pins, and 152 R-Clips
Assembly Crew2 to 3 People
Assembly ToolsSteel Hammer and M10 Hex Allen Wrench Key
Clamp CompatibilityStandard 50 mm / 2 in Clamps
Truss CompatibilityEVT290S, F34, and Standard 290 mm Square Truss Systems

System Compatibility

EVT290S, F34, and Standard 290 mm Square Truss Systems.

The EVT290S-Adelanto uses 290 mm square truss, 50 mm main chords, and a matching conical connection system. Compatibility requires matching receiver spacing, coupler dimensions, and engineering data.

EVT290S Compatibility
Integrates with compatible EVT290S straight sections, corners, and expansion components.
F34 Compatibility
The booth can be expanded with pieces from the F34 Square Aluminum Truss series.
Standard 290 mm Systems
Verify receiver spacing, connection dimensions, and engineering data before combining systems.
50 mm Clamp Compatibility
Main chords accept properly rated standard 50 mm / 2 in clamps, which were specifically developed for this truss system.

Assembly Overview

Choose the Configuration First. Then Build the Booth in a Controlled Sequence.

The system is typically assembled by two to three people who are familiar with truss booth systems, and it assembles in minutes. The only tools required are a steel hammer and an M10 hex Allen wrench key.

01 — Select One Configuration
Choose the configuration that fits your space and brand presentation. Do not attempt to build both from one kit.
02 — Organize Components
Lay out straight sections, curved sections, corners, bases, couplers, pins, and R-Clips by position.
03 — Build the Overhead Structure
Assemble the upper structure at floor level, including the circular front sections.
04 — Install Base Components
Position and secure the bases according to the selected configuration.
05 — Lock Every Connection
Verify that all couplers, tapered pins, and R-Clips are fully seated.
06 — Final Inspection
Confirm plumb, level, ballast, clearances, and attachment security before use.

Safety and Engineering

Exhibit Loads, Ballast, and Overhead Elements Must Be Evaluated as One System.

Final capacity depends on the booth configuration, attached signs, lighting, graphics, monitors, rigging points, ballast, floor conditions, and venue requirements.

Do not exceed the load capacity of the EVT290S truss booth system.
Fully inspect the booth before every use, and do not use it if any damage or defect is found.
Use only complete, undamaged EVT290S-compatible components and connection hardware.
Use properly rated 50 mm clamps for the 50 mm main chords.
Do not apply loads directly at truss connections unless specifically allowed by the engineering data.
Sand bags are recommended for maximum security. Provide ballast or anchoring suitable for the actual booth configuration and venue conditions.

Evidence and Review

What Is Confirmed, and What Your Installation Must Still Establish.

The EVT290S-Adelanto is a 10x10 circular front booth of 290 mm square truss with 50 mm main chords, EN AW-6082 T6 aluminum construction, and a brushed-aluminum finish. These facts do not establish allowable load, ballast, anchoring, rigging, wind suitability, or stability for a specific installation or configuration.

Confirmed Product Facts
A 10x10 circular front booth of EVT290S 290 mm square aluminum truss, 9.97 ft in width, length, and height, weighing approximately 425 lb, with 2 available configurations.
Included Hardware
76 couplers, 152 coupler pins, and 152 R-Clips, supplied as 19 sets of connecting hardware.
Installation-Specific Facts
The selected configuration, attachment points, graphics, lighting, ballast, anchoring, floor conditions, and venue requirements must be determined for the actual event.
Evidence Worth Retaining
Keep the selected configuration image or drawing, the component and hardware count, the inspection record, assembly photos, and any required venue approvals with the project file.

System Questions

Frequently Asked Questions

What hardware comes with the Adelanto?

The booth ships with 76 couplers, 152 coupler pins, and 152 R-Clips, supplied as 19 sets of connecting hardware. Every set contains the couplers, coupler pins, and R-Clips needed for the conical connections.

How long does setup take, and what tools do I need?

Two to three people who are familiar with truss booth systems can typically assemble the booth in minutes. You need only a steel hammer and an M10 hex Allen wrench key.

Can I change the look of the booth for another show?

Yes. One set of components builds 2 different configurations, each with the circular front, so you can switch between them from show to show. Custom powder coat finishes and smaller truss segment lengths are also available upon request.

Can I make the booth bigger or add accessories?

Yes. You can expand the booth with pieces from the F34 Square Aluminum Truss series, and standard 50 mm / 2 in clamps fit the main chords. Contact us for CAD files and engineering coordination.

Need a reusable 10x10 truss exhibit with a circular front?

Contact us for assembly support, graphics and lighting selection, custom finishes, additional EVT290S components, engineering, CAD files, and quantity pricing.

Contact UsRequest a Quote

Structural Solutions, Unmatched Innovation